insulated bearings for wind turbines -币游国际app

home » news center » »
the article citations: time:2015-12-29 09:11:24

mainshaft bearings
for instance, for main shafts, designs include . the company says these increase efficiency and service life. credit for that goes to new materials and improved heat treatments that significantly increase overall bearing service life. the company manufactures all sizes of mainshaft bearings, from designs for common 1.5-mw turbines to the more recent 3.5-mw designs.

 for generators are ceramic coated.
for generators are well insulated against electrical currents. generators often produce stray currents that cause electrolytic corrosion which can shorten bearing life. to combat the problem, jxkj’s  insulate themselves from electric current. a ceramic coating applied to the outer surface and sides of the outer ring prevent current from passing though the bearing. the ceramic provides an insulation resistance of at least 2,000 m-ohm under normal operating temperatures, alleviating electrical arcing and early bearing failure.  come with or without seals or shields, and are interchangeable with standard, non-insulated units.

for yaw gearboxes,  are compact designs with high-load capacities. a yaw gearbox rotates a turbine face to keep it into the wind. the gearbox here is generally small yet capable of transmitting high torque so its bearings must be compact and capable of high loads.

lastly, main gearboxes, or speed increasers, turn the low-speed rotor into higher speeds for generators. these generally use cylindrical roller, tapered roller, and occasionally spherical roller and ball bearings.  for gearboxes have higher rigidity and lower friction than conventional bearings through reduced rolling element slippage.
 
 
网站地图